How Do I Put Paper In My HP Wireless Printer?

How do I put 4×6 paper in my HP printer?

Load 4 x 6 inch (10 x 15 cm) photo paper into an HP Photosmart 325 or 375 printerTurn on the printer.

Both the front paper out tray and the rear paper in tray should open when the printer is turned on.

Insert the paper with the printable surface facing towards the front of the printer with the tab (if any) on top..

Do printers print on the top or bottom?

The correct way up will depend on the particular printer. Most small laser printers these days take paper in from a fresh paper tray at the bottom, fed in short edge first, print on it starting with the page top, flip it over top to bottom and spew it out above the fresh paper tray.

How do you print a paper double sided?

Set up a printer to print to both sides of a sheet of paperClick the File tab.Click Print.Under Settings, click Print One Sided, and then click Manually Print on Both Sides. When you print, Word will prompt you to turn over the stack to feed the pages into the printer again.

Which way do you put paper in a printer?

Put the side to be printed on face up with the leading edge (top) of the paper in first. To print on the second side, put the paper face down, with the leading edge (top) of the paper in first. If letterhead paper is used, put it in with the heading face down and in first.

How do you connect a HP wireless printer?

On the printer’s control panel, go to the Network menu or touch the wireless icon and then go to settings. Select Wireless Setup Wizard. The Wireless Setup Wizard displays a list of wireless networks in the area. Note: Settings may be accessed by touching a wrench icon, depending on the product model.

Why does my printer say load tray 1 plain letter?

An example message would be 024-965 Load Tray 1 Letter Plain. This indicates that the print job sent has requested Letter sized Plain paper from Tray 1. If tray 1 is empty, loaded with A4 sized Plain paper, or Letter sized Thick paper this error will occur. Another common example is 024-969 Load MPF A4 Plain.

Where do I put photo paper in my HP printer?

Load photo paper Open the paper tray door, pull out the paper tray, and then slide the paper width guides to their outermost positions. Load a stack of photo paper into the tray, with the short edge facing toward the product and the print side down. Push the stack into the tray until it stops.

How do I print a 4×6 picture on my printer?

Your choices are:To first crop to 4×6 so you control what gets cut off and what is included. Select and open your photo, click on Edit. Select Crop. … Or.Use the customize screen when printing. Select the photo, select print. Choose your printer, paper size, print size.

How do I get my HP printer to print?

How to printSelect the file you want to print and open the file so it appears on your computer screen.Press the Ctrl and P buttons on your keyboard at the same time.Once the printing pop-up menu appears on your computer screen, select the printer you intend to send the job to.If needed, modify your print settings.More items…

Why does my HP printer say load paper?

The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper settings in the print driver do not match the paper loaded in the paper tray. The rubber paper-feed rollers are dusty.

Why does my printer keep saying no paper?

Check the paper, and then reload it Check the paper stack for defects such as wrinkled, torn, or bent pieces that might cause a pick-up issue. Remove any paper from the paper tray. Remove any severely bent, wrinkled, or torn paper found in the stack. Check for obstructions inside the paper tray.